๋น ๋ฅธ ์บ์‹œ๋ฐฑ
ํ˜„๋ช…ํ•œ ์†Œ๋น„
์•Œ๋œฐ ์Šต๊ด€
๊ณต์œ ํ•˜๊ณ  ์ ๋ฆฝ
๊ธฐ๊ณ„ ๋ฐ ์•ก์„ธ์„œ๋ฆฌ
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
AliExpress + ์บ์‹œ๋ฐฑ

Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel

2.7
๐Ÿ’ธ 1.0% +1.0% ์บ์‹œ๋ฐฑ ์—…๋ฐ์ดํŠธ
* ์—…๋ฐ์ดํŠธ ๋˜์ง€ ์•Š์€ ์ƒํ’ˆ์˜ ์บ์‹œ๋ฐฑ ๋น„์œจ์€ ๋ณ€๋™ ๋  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.
* ์ถ”๊ฐ€ ์บ์‹œ๋ฐฑ์€ ์•„๋ž˜์˜ "์ง€๊ธˆ ์‡ผํ•‘ํ•˜๊ธฐ"๋ฅผ ํด๋ฆญํ•˜๊ณ  ํ˜„์žฌ ์ œํ’ˆ์„ ๊ตฌ๋งคํ•œ ํ›„์— ์ ์šฉ๋ฉ๋‹ˆ๋‹ค.
์ง„ํ–‰ & ์˜ˆ์ • ์ด๋ฒคํŠธ
๋Œ€ํ•œ๋ฏผ๊ตญ KR   <ํ–‰์‚ฌ ๊ธฐ๊ฐ„>
  - 1์›” 8์ผ ~1์›” 11์ผ
  <ํ”„๋กœ๋ชจ์…˜ ์•ˆ๋‚ด>
  1๏ผ‰๋“œ๋ผ๋ฏธ ๋ธŒ๋žœ๋“œ ๊ธฐํš์ „ (*๋ชจ๋ฐ”์ผ์—์„œ๋งŒ ์ ‘์†๊ฐ€๋Šฅ)
  โ€’ ์ตœ๋Œ€ 60%ํ• ์ธ, ๋กœ๋ด‡์ฒญ์†Œ๊ธฐ ๋ถ€ํ„ฐ ๋“œ๋ผ์ด๊ธฐ ๊นŒ์ง€!

  2๏ผ‰์Šคํฌํ‹€๋Ÿฌ ๋ธŒ๋žœ๋“œ ๊ธฐํš์ „ (*๋ชจ๋ฐ”์ผ์—์„œ๋งŒ ์ ‘์†๊ฐ€๋Šฅ)
  โ€’ ์ตœ๋Œ€ 75%ํ• ์ธ ํƒ€์ž„๋”œ ๋ถ€ํ„ฐ, ์ตœ๋Œ€ 5,000์› ํ• ์ธ ์ฟ ํฐ ์ฆ์ • ๊นŒ์ง€ ์ฐพ์•„๋ณด์„ธ์š”!
๋น ๋ฅธ ์บ์‹œ๋ฐฑ
์•Œ๋œฐํ•œ ์Šต๊ด€
๊ณต์œ  ํ•˜๊ณ  ์ ๋ฆฝ
Loading...

Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel

Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel Center Drill Tungsten Carbide Point Drill Centering Positioning Drill 60 90 120 Degree Chamfering Milling Cutter Aluminum Steel
ํŽผ์น˜๊ธฐ

์•Œ๋ฆฌ์ต์Šคํ”„๋ ˆ์Šค + ์บ์‹œ๋ฐฑ

โณ ์บ์‹œ๋ฐฑ ์ ๋ฆฝ ๋Œ€๊ธฐ ์‹œ๊ฐ„

  • โšก1์‹œ๊ฐ„ ์ด๋‚ด์— ๊ฒฐ์ œ ํ›„ '๋Œ€๊ธฐ ์ค‘' ์ƒํƒœ๋กœ ํ‘œ์‹œ๋ฉ๋‹ˆ๋‹ค.
  • ๐Ÿ’ธ ๊ตฌ๋งค ํ™•์ธ ํ›„ 4์ฃผ ์ด๋‚ด์— ์บ์‹œ๋ฐฑ์ด ์ ๋ฆฝ๋ฉ๋‹ˆ๋‹ค.(๋ณดํ†ต ๋” ์งง์€ ์‹œ๊ฐ„ ๋‚ด์— ์™„๋ฃŒ๋ฉ๋‹ˆ๋‹ค.)

๐Ÿ“ข ์ •๋ณด ๋ฐ ์กฐ๊ฑด

  • 5 % ๋ชจ๋ฐ”์ผ ์•ก์„ธ์„œ๋ฆฌ, ์˜๋ฅ˜*, ์ธํ…Œ๋ฆฌ์–ด ์•„์ดํ…œ, ์ •์› ์•ก์„ธ์„œ๋ฆฌ
    + ์บ์‹œ๋ฐฑ ํ™•์ธ: ์ œํ’ˆ๋ณ„ ์ถ”๊ฐ€ ์บ์‹œ๋ฐฑ (์ตœ๋Œ€ 10%)
  • 1 % ๊ธฐํƒ€ ๋ฐ ๋น„์ œํœด ์ œํ’ˆ*
    + ์บ์‹œ๋ฐฑ ํ™•์ธ: ์ œํ’ˆ๋ณ„ ์ถ”๊ฐ€ ์บ์‹œ๋ฐฑ (์ตœ๋Œ€ 5%)
  • 0 % ์•„๋ž˜ ๋‚˜์—ด๋œ ํŒ๋งค์ž๋กœ๋ถ€ํ„ฐ ์ฃผ๋ฌธํ•œ ๊ฒฝ์šฐ*

๐Ÿ“ฃ ์ถ”๊ฐ€ ์ค‘์š”ํ•œ ์ •๋ณด

  • * ์บ์‹œ๋ฐฑ์„ ์ œ๊ณตํ•˜์ง€ ์•Š๋Š” ์ƒ์  ๋ชฉ๋ก์ž…๋‹ˆ๋‹ค.
  • * ์˜๋ฅ˜ ์นดํ…Œ๊ณ ๋ฆฌ๋Š” ๋‚จ์„ฑ ์˜๋ฅ˜, ์—ฌ์„ฑ ์˜๋ฅ˜ ๋ฐ ์•„๋™ ์˜๋ฅ˜๋กœ ์ œํ•œ๋ฉ๋‹ˆ๋‹ค.
  • * ๋น„์ œํœด ์ œํ’ˆ์€ AliExpress ์ œํœด ํ”„๋กœ๊ทธ๋žจ์— ์ฐธ์—ฌํ•˜์ง€ ์•Š๋Š” ์ƒ์ ์˜ ์ œํ’ˆ์ž…๋‹ˆ๋‹ค. ์ด๋Ÿฌํ•œ ์ œํ’ˆ์— ๋Œ€ํ•ด์„œ๋Š” ์ œํ’ˆ ์นดํ…Œ๊ณ ๋ฆฌ์— ๊ด€๊ณ„์—†์ด AliExpress๊ฐ€ ๋‹จ 1%์˜ ์บ์‹œ๋ฐฑ๋งŒ์„ ์ œ๊ณตํ•ฉ๋‹ˆ๋‹ค.
  • ์บ์‹œ๋ฐฑ์€ ๋ชจ๋“  ์ œํ’ˆ์— ์ ์šฉ๋˜์ง€ ์•Š์„ ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค. ์ œํ’ˆ URL์„ ๋ถ™์—ฌ๋„ฃ์–ด ํ™•์ธํ•ด ์ฃผ์„ธ์š”.
  • ์ฃผ๋ฌธ๋‹น ์ตœ๋Œ€ ์บ์‹œ๋ฐฑ์€ 40๋‹ฌ๋Ÿฌ์ž…๋‹ˆ๋‹ค.
  • ํ†ตํ™” ์„ค์ •์ด USD๊ฐ€ ์•„๋‹Œ ๊ฒฝ์šฐ, ๊ณ„์ •์— ํ‘œ์‹œ๋œ ์บ์‹œ๋ฐฑ ๊ธˆ์•ก์€ ํ™˜์œจ ๋ณ€๋™์œผ๋กœ ์ธํ•ด ๋‹ฌ๋ผ์งˆ ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.

โ• ์บ์‹œ๋ฐฑ์€ ๋‹ค์Œ ๊ฒฝ์šฐ์— ์ œ๊ณต๋˜์ง€ ์•Š์Šต๋‹ˆ๋‹ค.

  • ๋ถ€๊ฐ€์„ธ, ๊ธฐํƒ€ ์„ธ๊ธˆ, ๋ฐฐ์†ก๋น„ ๋ฐ ๊ฐ ๊ฒฐ์ œ์˜ ํ• ์ธ ๊ธˆ์•ก.
  • ์บ์‹œ๋ฐฑ์ด 0.01 USD๋ณด๋‹ค ๋‚ฎ์Šต๋‹ˆ๋‹ค.
  • ์บ์‹œ๋ฐฑ ํ™œ์„ฑํ™” ์ „์— ์œ„์‹œ๋ฆฌ์ŠคํŠธ์—์„œ ์žฅ๋ฐ”๊ตฌ๋‹ˆ๋กœ ์ด๋™ํ•œ ์ œํ’ˆ๋“ค์ž…๋‹ˆ๋‹ค.
  • ์—ด๋ฆฐ ๋ถ„์Ÿ์ด ์žˆ๋Š” ๋ชจ๋“  ์ฃผ๋ฌธ
  • ๊ธฐํ”„ํŠธ ์นด๋“œ, ์ฟ ํฐ ๋˜๋Š” ๊ฒฐ์ œ ํ• ์ธ ๊ตฌ๋งค
  • ๋ฐฐ์†ก, ์„ ๋ฌผ ํฌ์žฅ, ํœด๋Œ€ํฐ ์ถฉ์ „ ๋“ฑ๊ณผ ๊ฐ™์€ ์ถ”๊ฐ€ ์„œ๋น„์Šค
  • ํŒ๋งค์ž๊ฐ€ ์ƒํ’ˆ์ด ์žฅ๋ฐ”๊ตฌ๋‹ˆ์— ์ถ”๊ฐ€๋œ ํ›„ ๊ฐ€๊ฒฉ์„ ๋ณ€๊ฒฝํ•˜๋Š” ๊ฒฝ์šฐ.
  • ์ฃผ๋ฌธ ์ƒํƒœ๊ฐ€ '๊ฒฐ์ œ ๋Œ€๊ธฐ ์ค‘'์œผ๋กœ 3์ผ ์ด์ƒ ์œ ์ง€๋˜๋ฉด.
  • ๊ด€๋ จ ์‹œ์žฅ์—์„œ ๋น„์ œํœด ์ œํ’ˆ ๊ตฌ๋งค
    (๊ด€๋ จ ์‹œ์žฅ: ๋Ÿฌ์‹œ์•„ ์—ฐ๋ฐฉ, ์•„์ œ๋ฅด๋ฐ”์ด์ž”, ์•„๋ฅด๋ฉ”๋‹ˆ์•„, ๋ฒจ๋ผ๋ฃจ์Šค, ์กฐ์ง€์•„, ์นด์žํ์Šคํƒ„, ํ‚ค๋ฅด๊ธฐ์Šค์Šคํƒ„, ๋ชฐ๋„๋ฐ”, ํˆฌ๋ฅดํฌ๋ฉ”๋‹ˆ์Šคํƒ„, ํƒ€์ง€ํ‚ค์Šคํƒ„ ๋ฐ ์šฐ์ฆˆ๋ฒ ํ‚ค์Šคํƒ„)
๋น„์Šทํ•œ ์ƒํ’ˆ
๋” ๋‘˜๋Ÿฌ๋ณด๊ธฐ
๋ฉ”๋‰ด